FiberMix 2401-30 FiberMix 2601-30 Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port, 1 E1 port and 1 Fast-Ethernet port

FiberMix 2401-30

Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port
(Single mode 1310nm TX 1550nm RX), 1 E1 port and 1 Fast-Ethernet port

FiberMix 2601-30

Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port
(Single mode 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port

Specification | Front panel | Back panel | Ordering information

View Larger Picture

FiberMix 2401-30 and FiberMix 2601-30 Multi-service PDH Fiber Optical Multiplexers are ideal optical fiber transmission devices for point-to-point networks, small and medium-sized capacity networks, such as wireless communication base stations, private communication networks and switching networks.
FiberMix 2401-30 and FiberMix 2601-30 provide one E1 links and one 100Mbps wire speed autonegotiation Fast Ethernet traffic. They are also locally and remotely monitor and controllable by SNMP through NView NNM network management platform.

User's manual

Quick start

•

Construction - Chassis module. Compatible with FiberMix RC002 series chassis for central office aggregation, or with FiberMix RC001-1 series chassis for remote standalone.

•

Fiber link option - Dual-strand fiber/single strand fiber (WDM)

•

Transmission distance -
Dual-strand fiber: up to 120km
Single strand fiber: up to 50km

•

Services - E1and Fast-Ethernet access extension over fiber

•

Ethernet Bandwidth management - Ethernet port upstream and downstream bandwidth allocation at 32Kbps increment. The Max bandwidth is 100Mbps.The customer gets corresponding bandwidth as he pays for.

•

MTU - Maximum transmission unit up to 1916 Bytes

•

Loop back - Error detection procedures are supported by test loop-back and each E1 channel can be diagnosed by loop-back.

•

SNMP management - Monitor and configure the local and remote equipments by SNMP solution in pairs of module to standalone application or module to module application

•

Security - E1 and Ethernet traffics are isolated by TDM technology

Optical port
	Bit Rate 150Mbps
	Connector SC

Ethernet port
	IEEE Standard 10/100Base-Tx
	Connector RJ-45

E1 port
	Bit Rate 2048Kbps
	Code HDB3
	Impedance 120 ohm
	Connector RJ-45
	ITU Standard ITU-T G.703, G.823

Dimensions
	91(W)25(H)155(D) (mm)

Power
	Power Supply 115/230VAC or -48VDC
	Power Consumption 5W

Environment
	Working ambience Temp: -5~60 centigrade RH: 5~90% non-condensing

Compliance
	CE certification

FiberMix 2401-30-X	Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX), 1 E1 port and 1 Fast-Ethernet port
FiberMix 2601-60-X	Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port
Suffix X= (single strand fiber)	S1: Single mode, 0~25 km S2: Single mode, 10~50 km

Also see the products of this group:

G.703 E1-U/ FE1/ FE1-A Single Port E1 and Fractional E1 Access Unit

FiberMix 903-V35FE1 V.35 to E1 fractional Interface Converter

FiberMix 904-V35FE1 Module, V.35 to transparent or fractional E1 interface converter, SNMP-management

FiberMix 907-EV35 Standalone 10BaseT to V.35 Converter

FiberMix 905-EE1 Standalone 10Mbps on Transparent or Fractional E1 Converter

FiberMix 001-1 1-slot Chassis

FiberMix 002-4 4-slot Chassis (managed)

FiberMix 002-16 16-slot Modular Converter Chassis with SNMP Management

FiberMix 001-NMS1 Master Management Agent Module for 3U Chassis

FiberMix 001-NMS2 Slave Management Module for 3U Chassis

FiberMix 004-16NMS1 Master Management Agent Module for 10U Chassis

FiberMix 004-16NMS2 Slave Management Module for 10U Chassis

FiberMix 802-60 Module, 2 E1 channels optical multiplexer, SNMP-management

FiberMix 803-120 Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V, DC – 48V

FiberMix 805-120B Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V, DC –48V

FiberMix 804-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX

FiberMix 806-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX

FiberMix 803-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-240B Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 2304-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, AC 115V or 230V, DC – 48V

FiberMix 2504-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, AC 115V or 230V, DC –48V

FiberMix 2401-30, FiberMix 2601-30 Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port

FiberMix 2401-60, FiberMix 2601-60 Module- PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 2 E1 ports and 1 Fast-Ethernet port

FiberMix 3100-155 SDH Multi-Service multiplexer

If you need further information, please fill out this form below

What kind of information would you like to receive from us?

Please fill out the contact information:
First name/Last name: *
Company: *
E-mail: *
Your phone (country/city code): *

* Indicated a required field

DYNAMIX^®