|
|
|
DYNAMIX HP-30/S
|
| HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100 Base-TX) |
|
|
|
|
|
The HomePNA3.1 Ethernet Adapter, DYNAMIX
HP-30/S, Enables You to Set-up Your Private Network at Home with Your Existing Telephone
Lines. No Additional Network Wiring is Necessary. You may Just Find a RJ-11 Phone Jack in the Wall, Put the Phoneline and Plug into the
Jack, You can then be Ready to Access the Broadband Internet (through ADSL2+ Firewall Router
DYNAMIX HP-40R or DYNAMIX
HP-40R/W).
No Extra Utility is Needed. No Setting, Just Link. Simply Plug & Play.
Via the RJ-45 Ethernet Ports, You can Connect DYNAMIX HP-30/S with the
Ethernet -Interfaced Devices such as STB, Camera Server, or Switch/Hub. The High Speed of 128Mbps will Bring You to Enjoy the
Video-On-Demand (VOD) or Multimedia-On-Demand (MOD) Services.
With DYNAMIX HP-30/S, SOHO HomePNA3.1 Ethernet Adapter can Even Quickly Extend or Flexibly Change the
Existing LAN Environment. Reducing Most Rewiring.
|
User's manual
Quick start
|
|
|
|
| • |
128Mbps HomePNA Port as Home Network Backbone by
Using Existing Phone Lines |
| • |
Two 10/100M Fast Ethernet Ports for
FTTH, DSL/Cable Modem, and Ethernet Terminals Such As PC, STB.,
etc. |
| • |
Distance up to 2000 Feet on HomePNA Port |
| • |
Filter Build-in to Eliminate Noise from Phone Sets or
PSTN Line |
| • |
QoS Priority and Mapping Support |
| • |
Plug & Play |
| • |
Compact Size Design |
 Back to Top
|
|
|
|
|
| Network Standards |
| | HomePNA V3.1 |
| | ITU-T G.9954 |
| | IEEE802.3 |
| | IEEE802.3u |
| | IEEE802.3x |
| Connectors |
| | Ethernet : Two RJ-45 Ports |
| | HomePNA : Two RJ-11
Ports, One for HomePNA, the Other One for Phoneline By-Pass |
| Transmission Speed |
| | Up to 128 Mbps |
| Transmission Distance |
| | Up to 600m |
| Quality of Service |
| | TAG VLAN Pass Through |
| | Priority Mapping based on
IEEE802.1p/IP TOS/Diffserv |
| Fast Ethernet Interface |
| | 10/100Mbps |
| | MDI/MDI-X Auto Crossover |
| Indicators |
| | "Power" LED |
| | Ethernet "Link/Activity" LED x 2 |
| | HomePNA "Link/Activity"
LED, |
| | "SyncMode" LED |
| Power Requirement |
| | External Power Supply : 5 VDC |
| | Consumption : < 5 Watts |
| EMI/EMC |
| | Comply with FCC |
| | Comply with CE |
| | Comply VCCI |
| PTT Approval |
| | Comply with FCC Part 68 |
| | UL/cUL, CSA, En60950 |
| Environmental Conditions |
| | Operating Temperature : 0°C~ 40°C(32°F ~ 102°F) |
| | Storage Temperature :-10°C~ 65°C(14°F ~149°F) |
| | Operating Humidity : 10% ~ 95%, Non-condensing |
| Physical Dimension |
| | 114mm (W) x 67mm (D) x 25mm (H) |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
|
| DYNAMIX HP-30/S |
HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100 Base-TX) |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
HomePNA 3.0 Switch, adapter, router
|
|
DYNAMIX HP- 40R New ! HPNA ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 40R/W New ! HPNA 802.11g ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30/S
New ! HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX DH-314
14-port
HomePNA 3.0 (128 Mbps) switch
(2 ports 10/100/1000 Base-TX)
|
|
DYNAMIX HP-30C HomePNA 3.0 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30U HomePNA 3.0 (128
Mbps) - USB
adapter
|
|
HomeCNA 3.0 router, adapter
|
|
DYNAMIX HP- 51/M
New ! HomeCNA3.1 Coax MDU Master Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 51/S New !
HomeCNA3.1 Coax Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 41R
New ! HCNA ADSL2+ Firewall Router (4 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 41R/W
New ! HCNA 802.11g ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP-31/S
New ! HCNA (HomePNA 3.1 over Coax) to Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30 Coax HCNA (HomePNA 3.0 over Coax) to Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
|
