DYNAMIX HP- 41R HCNA ADSL2+ Firewall Router

DYNAMIX HP- 41R

HCNA ADSL2+ Firewall Router

Specification | Front panel | Back panel | Application | Ordering information

	DYNAMIX HP- 41R comply with ADSL2+/ADSL2/ADSL worldwide standards, as well as ADSL2+/ADSL2 Annex A+M. Downstream rate up to 24/12/8 Mbps and Upstream rate up to 1 Mbps. Through HCNA (HomePNA3 over Coax) port, users enjoy IPTV service and high-speed Internet services in every room by using existing coax cable without new wiring. No Additional Cables or Wiring Required You can utilize the existing coaxial TV cable in your home to enjoy ADSL service. By simply connecting the coaxial cable to the router, you can extend high-speed ADSL applications without extra equipment or new wiring. With this plug-and-play device, there’s no need to make the extra effort of rebuilding your home network.	User's manual Quick start
Fast and Responsive Net Connection: The Quality of Service (QoS) feature helps users manage bandwidth and prioritize data traffic effectively. It gives you full control over any type of data traffic. It ensures that latency-sensitive and bandwidth-consuming applications and data such as P2P sharing programs, VoIP calls, video streaming, and gaming packets can move through the router at lightning speed, even under a heavy load. You can control the speed of inbound and outbound data passing through the router to ensure that users do not saturate the bandwidth with their browsing activities. Robust Firewall Security: Built-in NAT natural firewall and advanced hacker pattern-filtering. DYNAMIX HP- 41R Support Stateful Packet Inspection (SPI). Prevent Denial of Service (DoS) attacks.

•

ADSL2+/ADSL2/ADSL for Internet Access

•

Build the Home Networking LAN by Using Existing Coaxial Cable

•

Built-in 4-port 10/100Mbps Fast Ethernet Switch

•

Multi-Protocol to Establish WAN Connections

•

Universal Plug and Play (UPnP)

•

NAT/DNS Relay/DDNS/DHCP/Virtual Server/RIP1,2/SNMP

•

Firewall Security for Dos/SPI/Packet Filtering

•

Rich QoS Features

•

Web based GUI Configuration through LAN or WAN

•

Firmware Upgradeable

•

Firmware Upgrade for HCNA End-Points(EP) - DYNAMIX HP-31/S

•

Diagnosis for HCNA EP - DYNAMIX HP-31/S

ADSL Compliance
	ADSL2+ : G.dmt.bisplus(ITU G.992.5), Annex M (ITU G.992.5) --Available for Annex A+M model only
	ADSL2 : G.dmt.bis(ITU G.992.3), Annex M
	ADSL : Full rate ANSI T1.413 Issue 2 G.dmt (ITU G.992.1), G.hs (ITU G.994.1) ADSL over ISDN/U-R2

ATM and PPP Protocols
	ATM Adaptation Layer Type 5 (AAL5)
	Multiple Protocol over AAL5 (RFC2684, formerly RFC1483)
	Bridged or Routed Ethernet Encapsulation
	VC and LLC based Multiplexing
	PPP over Ethernet (PPPoE)
	PPP over ATM (RFC2364)
	Classical IP over ATM (RFC1577)
	MAC Encapsulated Routing (RFC1483 MER)
	OAM F4/F5

HCNA (HPNA3 over Coax) Compliance
	Spectrum: 4-20MHz
	Transmission Power: 0 +/-1 dBm
	Data Rate: Up to 128Mbps
	Distance: up to 4000 Feet (-176dBm/Hz Noise Floor)

Connectors
	WAN : One RJ-11 ADSL Port
	LAN Ethernet : Four 10/100M Auto Crossover(MDI/MDI-X) Ports
	LAN HCNA : Two F-Type Female Coax Connectors. One for HCNA, the Other for TV.

Network Protocols and Features
	NAT, Static Routing and RIP-1/2
	Universal Plug and Play (UPnP) Compliant
	Dynamic Domain Name System (DDNS)
	Virtual Server and DMZ
	SNTP, DNS Relay and IGMP Proxy
	POP3 (Email Account Checking)
	IGMP Snooping for Video Service
	DHCP Server/Client/Relay

Firewall
	Built-in NAT Firewall
	Stateful Packet Inspection (SPI)
	Prevent DoS Attacks including IP Spoofing, Land Attack, Smurf Attack, Ping of Death, TCP SYN Flooding, etc.
	Packet Filtering - Port/Source IP/Destination IP/MAC Address
	URL Content Filtering - String/Domain Name Detection in URL

Quality of Service
	Support DiffServ Approach
	Traffic Prioritization and Bandwidth Management based on IP Protocol, Port Number and Address
	Quaranteed QoS based on HomePNA3.1 Parameterized QoS

Management
	Quick Installation Wizard and Auto-Scan ADSL Settings
	Web based GUI for Remote and Local Management
	Firmware Upgrade and Configuration Data Backup/Restore
	Diagnosis of HCNA Interface
	Firmware Upgrade for HCNA End-Points(EP)
	Embedded Telnet Server
	Available Syslog Monitoring
	TR-069 Compliant for Remote Management
	SNMP v3, MIB-I/MIB-II Support

Reset Button
	Force to Factory Setting

Indicators
	"PWR" Power LED
	"SYS" System Status LED
	"Link/Act", "SyncMode" LEDs for HCNA
	"LAN1", "LAN2", "LAN3", "LAN4" LEDs for Ethernet
	"ADSL" ADSL Line Status LED
	"Internet" PPPoE/PPPoA/Email LED

Power
	One Power Switch : Power On/Off
	One Power Jack : 12V DC, 1.0A
	Power Consumption < 12 Watt

EMI/EMC
	Comply with FCC Part15
	Comply with CE

Environmental Conditions
	Operating Temperature : 0 C ~ 40 C (32 F ~ 104 F)
	Storage Temperature : -10 C ~ 65 C (14 F ~ 149 F)
	Operating Humidity : 10% ~ 95%, Non-Condensing
	210mm (W) x 148mm (D) x 36mm (H)
	Weight: about 1000g

DYNAMIX HP- 41R

HCNA ADSL2+ Firewall Router

Also see the products of this group:

HomePNA 3.0 Switch, adapter, router

DYNAMIX HP- 40R New ! HPNA ADSL2+ Firewall Router (4 ports 10/100 Base-TX)

DYNAMIX HP- 40R/W New ! HPNA 802.11g ADSL2+ Firewall Router (4 ports 10/100 Base-TX)

DYNAMIX HP-30/S New ! HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100 Base-TX)

DYNAMIX DH-314 14-port HomePNA 3.0 (128 Mbps) switch (2 ports 10/100/1000 Base-TX)

DYNAMIX HP-30C HomePNA 3.0 (128 Mbps) - Ethernet adapter (2 ports 10/100 Base-TX)

DYNAMIX HP-30U HomePNA 3.0 (128 Mbps) - USB adapter

HomeCNA 3.0 router, adapter

DYNAMIX HP- 51/M New ! HomeCNA3.1 Coax MDU Master Bridge (2 ports 10/100 Base-TX)

DYNAMIX HP- 51/S New ! HomeCNA3.1 Coax Ethernet Bridge (2 ports 10/100 Base-TX)

DYNAMIX HP- 41R New ! HCNA ADSL2+ Firewall Router (4 ports 10/100 Base-TX)

DYNAMIX HP- 41R/W New ! HCNA 802.11g ADSL2+ Firewall Router (4 ports 10/100 Base-TX)

DYNAMIX HP-31/S New ! HCNA (HomePNA 3.1 over Coax) to Ethernet Bridge (2 ports 10/100 Base-TX)

DYNAMIX HP-30 Coax HCNA (HomePNA 3.0 over Coax) to Ethernet Bridge (2 ports 10/100 Base-TX)