|
|
|
DYNAMIX HP- 41R/W
|
| HCNA 802.11g ADSL2+ Firewall Router |
|
|
|
|
DYNAMIX HP- 41R/W comply with ADSL2+/ADSL2/ADSL worldwide standards, as well as ADSL2+/ADSL2 Annex
A+M. Downstream rate up to 24/12/8 Mbps and Upstream rate up to 1 Mbps. With integrated 54Mbps 802.11g Access
Point DYNAMIX HP- 41R/W, brings users the
mobility. Through HCNA (HomePNA3 over Coax) port, users enjoy IPTV service and high-speed Internet services in every room by
using existing coax cable without new wiring.
No Additional Cables or Wiring Required
You can utilize the existing coaxial TV cable in your home to enjoy ADSL service. By simply connecting the
coaxial cable to the router, you can extend high-speed ADSL applications without extra equipment or new wiring. With this plug-and-play device, there’s no need to make the extra effort of rebuilding your home
network.
|
User's manual
Quick start
|
Fast and Responsive Net Connection:
The Quality of Service (QoS) feature helps users manage bandwidth and prioritize data traffic
effectively. It gives you full control over any type of data traffic. It ensures that latency-sensitive and bandwidth-consuming applications and data such as P2P sharing
programs, VoIP calls, video streaming, and gaming packets can move through the router at lightning
speed, even under a heavy load. You can control the speed of inbound and outbound data passing through the router to ensure that users do not saturate the bandwidth with their browsing
activities.
Robust Firewall Security:
Built-in NAT natural firewall and advanced hacker
pattern-filtering. DYNAMIX HP- 41R/W Support Stateful Packet Inspection
(SPI). Prevent Denial of Service (DoS) attacks.
|
|
|
|
| • |
ADSL2+/ADSL2/ADSL for Internet Access |
| • |
Build the Home Networking LAN by Using Existing Coaxial Cable |
| • |
Built-in 4-port 10/100Mbps Fast Ethernet Switch |
| • |
Support Wireless 802.11g/b |
| • |
Multi-Protocol to Establish WAN Connections |
| • |
Universal Plug and Play (UPnP) |
| • |
NAT/DNS Relay/DDNS/DHCP/Virtual
Server/RIP1,2/SNMP |
| • |
Firewall Security for Dos/SPI/Packet Filtering |
| • |
Rich QoS Features |
| • |
Web based GUI Configuration through LAN or WAN |
| • |
Firmware Upgradeable |
| • |
Firmware Upgrade for HCNA
End-Points (EP) - DYNAMIX HP-31/S |
| • |
Diagnosis for HCNA EP - DYNAMIX HP-31/S |
 Back to Top
|
|
|
|
|
| ADSL Compliance |
| | ADSL2+ :
G.dmt.bisplus (ITU G.992.5),
Annex M (ITU G.992.5) - Available for Annex A+M model only |
| | ADSL2 :
G.dmt.bis(ITU G.992.3), Annex M |
| | ADSL : Full rate ANSI T1.413 Issue 2
G.dmt (ITU G.992.1), G.hs (ITU G.994.1)
ADSL over ISDN/U-R2 |
| ATM and PPP Protocols |
| | ATM Adaptation Layer Type 5 (AAL5) |
| | Multiple Protocol over AAL5 (RFC2684, formerly RFC1483) |
| | Bridged or Routed Ethernet Encapsulation |
| | VC and LLC based Multiplexing |
| | PPP over Ethernet
(PPPoE) |
| | PPP over ATM (RFC2364) |
| | Classical IP over ATM (RFC1577) |
| | MAC Encapsulated Routing (RFC1483
MER) |
| | OAM F4/F5 |
| Wireless 802.11g |
| | Compliant with IEEE 802.11g and 802.11b |
| | 2.4 GHz - 2.484G Hz Frequency Range |
| | Data Rate: Up to 54Mbps |
| | Support 64/128 bits WEP |
| | Support WPA |
| HCNA (HPNA3 over Coax) Compliance |
| | Spectrum: 4-20MHz |
| | Transmission
Power: 0 +/-1 dBm |
| | Data Rate: Up to 128Mbps |
| | Distance: up to 4000
Feet (-176dBm/Hz Noise Floor) |
| Connectors |
| | WAN : One RJ-11 ADSL Port |
| | LAN Wireless : One Detachable Antenna Port |
| | LAN Ethernet : Four 10/100M Auto
Crossover(MDI/MDI-X) Ports |
| | LAN HCNA : Two F-Type Female Coax
Connectors.
One for HCNA, the Other for TV. |
| Network Protocols and Features |
| | NAT, Static Routing and RIP-1/2 |
| | Universal Plug and Play
(UPnP) Compliant |
| | Dynamic Domain Name System
(DDNS) |
| | Virtual Server and DMZ |
| | SNTP, DNS Relay and IGMP Proxy |
| | POP3 (Email Account
Checking) |
| | IGMP Snooping for Video Service |
| | DHCP Server/Client/Relay |
| Firewall |
| | Built-in NAT Firewall |
| | Stateful Packet Inspection
(SPI) |
| | Prevent DoS Attacks including IP
Spoofing,
Land Attack, Smurf Attack, Ping of Death, TCP SYN
Flooding, etc. |
| | Packet Filtering
- Port/Source IP/Destination IP/MAC Address |
| | URL Content Filtering
- String/Domain Name Detection in URL |
| Quality of Service |
| | Support DiffServ Approach |
| | Traffic Prioritization and Bandwidth Management based on
IP Protocol, Port Number and Address |
| | Quaranteed QoS based on HomePNA3.1 Parameterized QoS |
| Management |
| | Quick Installation Wizard and Auto-Scan ADSL Settings |
| | Web based GUI for Remote and Local Management |
| | Firmware Upgrade and Configuration Data
Backup/Restore |
| | Diagnosis of HCNA Interface |
| | Firmware Upgrade for HCNA
End-Points (EP) - DYNAMIX HP-31/S |
| | Embedded Telnet Server |
| | Available Syslog Monitoring |
| | TR-069 Compliant for Remote Management |
| | SNMP v3, MIB-I/MIB-II Support |
| Reset Button |
| | Force to Factory Setting |
| Indicators |
| | "PWR" Power LED |
| | "SYS" System Status LED |
| | "Link/Act",
"SyncMode" LEDs for HCNA |
| | "LAN1", "LAN2", "LAN3", "LAN4" LEDs for Ethernet |
| | "ADSL" ADSL Line Status LED |
| | "Internet"
PPPoE/PPPoA/Email LED |
| |  |
| Power |
| | One Power Switch : Power
On/Off |
| | One Power Jack : 12V
DC, 1.0A |
| | Power Consumption < 12 Watt |
| EMI/EMC |
| | Comply with FCC Part15 |
| | Comply with CE |
| Environmental Conditions |
| | Operating
Temperature : 0 C ~ 40 C (32 F ~ 104 F) |
| | Storage
Temperature : -10 C ~ 65 C (14 F ~ 149 F) |
| | Operating
Humidity : 10% ~ 95%, Non-Condensing |
| | 210mm (W) x
148mm (D) x 36mm (H) |
| | Weight: about
1000g |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
|
| DYNAMIX HP- 41R/W |
HCNA 802.11g ADSL2+ Firewall Router |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
HomePNA 3.0 Switch, adapter, router
|
|
DYNAMIX HP- 40R New ! HPNA ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 40R/W New ! HPNA 802.11g ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30/S
New ! HomePNA 3.1 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX DH-314
14-port
HomePNA 3.0 (128 Mbps) switch
(2 ports 10/100/1000 Base-TX)
|
|
DYNAMIX HP-30C HomePNA 3.0 (128 Mbps) - Ethernet adapter (2 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30U HomePNA 3.0 (128
Mbps) - USB
adapter
|
|
HomeCNA 3.0 router, adapter
|
|
DYNAMIX HP- 51/M
New ! HomeCNA3.1 Coax MDU Master Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 51/S New !
HomeCNA3.1 Coax Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 41R
New ! HCNA ADSL2+ Firewall Router (4 ports 10/100
Base-TX)
|
|
DYNAMIX HP- 41R/W
New ! HCNA 802.11g ADSL2+ Firewall Router
(4 ports 10/100
Base-TX)
|
|
DYNAMIX HP-31/S
New ! HCNA (HomePNA 3.1 over Coax) to Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
DYNAMIX HP-30 Coax HCNA (HomePNA 3.0 over Coax) to Ethernet Bridge
(2 ports 10/100
Base-TX)
|
|
|
