|
|
|
FiberMix 803-480B
|
| Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V |
|
FiberMix 805-480B
|
| Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V |
|
|
|
View Larger Picture
|
FiberMix 803-480B and FiberMix 805-480B series fiber-optic multiplexers are ideal fiber-optic
transmission devices for point-to-point networks, medium-sized and small capacity
networks, such as wireless communication base stations, private communication
networks, and switching networks. The transmission capacity of
FiberMix 803-480B/FiberMix 805-480B is 16 E1
channels .
User-friendly, highly flexible 16-channel G.703 type multiplexer for a cost-effective
utilization of large networks. This multiplexer is a solution that ensures optimal management
and utilization of E1 interfaces, for instance in carrier network. In point-to-point
solution, it is used to bridge data transmission over distances of up to 120km without
the necessity of installing a signal repeater.
Error detection procedures are supported by loop-back function and each E1 channel
can be diagnosed by loop-back function. With its modular design on the line interface, this
multiplexer can be easily integrated into PDH network. Cost-effective single fiber solution
(WDM) is applicable.
|
User's manual
280
Kb
Quick start
|
|
|
|
| • |
FiberMix 803-480/FiberMix 805-480B constitute 16-channel slide-in module |
| • |
Slide-in module in 10U high chassis, housing standalone unit |
| • |
Optional WDM available |
| • |
SNMP management |
| • |
Error detection procedures are supported by loop-back function and each E1 channel can be diagnosed by loop-back function |
| • |
User-friendly, highly flexible 16-channel G.703 type multiplexer for a cost-effective
utilization of large networks |
| • |
Cost-effective single fiber solution (WDM) is applicable |
 Back to Top
|
|
|
|
|
| Interface |
| | E1 (75ohm or 120ohm
RJ45) |
| Line |
| | 1310nm multimode/single mode, 1550nm DFB single mode (SC connector) |
| Transmission
distance |
| | up to 120km; WDM solution is up to 60km |
| SNMP management |
| | via slide-in modular agent in the chassis, in-band management for the remote unit |
| Dimensions |
| | standalone unit: 440(W)*43.6(H)*180(D) (mm) |
| Environment |
| | 0~65 degrees Centigrade operating less than 90% humidity (25 degrees Centigrade) |
| Compliance |
| | CE certification |
|
|
Back to Top
|
|
|
|
|
|
|
|
| FiberMix 803-480B |
Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V |
| FiberMix 805- 480B |
Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL,
1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
G.703
E1-U/ FE1/ FE1-A Single Port E1 and Fractional E1 Access Unit
|
|
FiberMix 903-V35FE1
V.35 to E1
fractional Interface Converter
|
|
FiberMix 904-V35FE1
Module, V.35 to transparent or fractional E1 interface converter, SNMP-management
|
|
FiberMix 907-EV35 Standalone 10BaseT to
V.35 Converter
|
|
FiberMix 905-EE1 Standalone 10Mbps on Transparent or Fractional
E1 Converter
|
|
FiberMix 001-1 1-slot Chassis
|
|
FiberMix 002-4 4-slot Chassis (managed)
|
|
FiberMix 002-16 16-slot Modular Converter Chassis with SNMP Management
|
|
FiberMix 001-NMS1 Master Management Agent Module for 3U Chassis
|
|
FiberMix 001-NMS2 Slave Management Module for 3U Chassis
|
|
FiberMix 004-16NMS1 Master Management Agent Module for 10U Chassis
|
|
FiberMix 004-16NMS2 Slave Management Module for 10U Chassis
|
|
FiberMix 802-60 Module, 2 E1 channels optical
multiplexer,
SNMP-management
|
|
FiberMix 803-120 Standalone, 4 E1 channels
optical multiplexer, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U
chassis, AC 115V or 230V, DC – 48V
|
|
FiberMix 805-120B Standalone, 4 E1
channels optical multiplexer, remote SNMP-management,
SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V, DC –48V
|
|
FiberMix 804-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX
|
|
FiberMix 806-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX
|
|
FiberMix 803-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V
|
|
FiberMix 805-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V
|
|
FiberMix 805-240B Standalone, 8 E1 channels optical
multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U
chassis, AC 115V or 230V/DC –48V
|
|
FiberMix 2304-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, AC 115V or 230V, DC – 48V
|
|
FiberMix 2504-120 Standalone,
4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management,
SSF, Dual WL, 1550nmTX 1310nmRX, AC 115V or 230V, DC –48V
|
|
FiberMix 2401-30, FiberMix 2601-30 Module
- PDH Fiber Optical Multiplexers - 1 single strand fiber optical
port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port
|
|
FiberMix 2401-60, FiberMix 2601-60 Module-
PDH Fiber Optical Multiplexers - 1 single strand fiber optical
port (Single mode 1310nm TX 1550nm
RX and 1550nm TX 1310nm RX), 2 E1 ports and 1 Fast-Ethernet port
|
|
FiberMix 3100-155
SDH Multi-Service multiplexer
|
|
|
