FiberMix 805-240B Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF

FiberMix 805-240B

Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

Specification | Ordering information

FiberMix 805-240B fiber-optic multiplexer is ideal fiber-optic transmission device for point-to-point networks, medium-sized and small capacity networks, such as wireless communication base stations, private communication networks, and switching networks. The basic transmission capacity of FiberMix 805-240B is 4 E1 channels, and the max is 8 E1 channels (equivalent to 240 voice channels).

Error detection procedures are supported by loop-back function and each E1 channel can be diagnosed by loop-back function. With its modular design on the line interface, this multiplexer can be easily integrated into PDH network. Cost-effective single fiber solution (WDM) is applicable.

User's manual
160 Kb

Quick start

•

Very large cale ASIC chips ensures low power consumption; 4-layer PCB ensures high reliability

•

Complete alarm indication that can display local and remote alarms simultaneously

•

Alarm lock memory and E1 channel loop-back test capabilities implements convenient operation and maintenance

•

Capable of local and remote network management, providing 4-bit address switch

•

FiberMix 805-240B series provides 2 expansion slots, which can be used to accommodate V.35 and Ethernet service expansion modules to implement various solutions.
- Basic capacity: 4 E1 multiplexer, compatible with FiberMix 805-120B series
- Max capacity: 4 E1 plus one 4 E1 expansion module, totally 8 E1 multiplexer
- Multi-service configuration: 4 E1 plus two expansion modules, providing V.35 and 10M Ethernet service interfaces

•

Cost-effective single fiber solution (WDM) is applicable

E1 Interface
	Bit rate: 2048Kbps±50ppm
	Line code: HDB3
	Impedance of interface: 75Ω (unbalanced) or 120Ω (balanced)
	Electrical characteristics: complies with ITU-T G.703
	Transfer characteristics: complies with ITU-T G.823
	Input jitter tolerance: complies with ITU-T G.823

Optical interface characteristic
	Bit rate: 100Mbps
	Line code: 4B5B
	Fiber connector: SC

Optical Port
	The fiber connector is DSC/PC for dual-strand models, TX for signal output and RX for signal input
	The fiber connector is SC/PC for single strand models

Network Management
	Local and remote management (CLI, GUI and SNMP)
	SNMP management via slide-in modular agent in the chassis, in-band management for the remote unit

Power Supply
	DC:-48V, range from -36V to72V
	AC:220V, range from 165V to 265V
	Power consumption: ≤15W

Ambience
	Working temperature: 0 ~ 45 °C
	Relative humidity: ≤ 90% (25°C)

FiberMix 805-240B

Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

Also see the products of this group:

G.703 E1-U/ FE1/ FE1-A Single Port E1 and Fractional E1 Access Unit

FiberMix 903-V35FE1 V.35 to E1 fractional Interface Converter

FiberMix 904-V35FE1 Module, V.35 to transparent or fractional E1 interface converter, SNMP-management

FiberMix 907-EV35 Standalone 10BaseT to V.35 Converter

FiberMix 905-EE1 Standalone 10Mbps on Transparent or Fractional E1 Converter

FiberMix 001-1 1-slot Chassis

FiberMix 002-4 4-slot Chassis (managed)

FiberMix 002-16 16-slot Modular Converter Chassis with SNMP Management

FiberMix 001-NMS1 Master Management Agent Module for 3U Chassis

FiberMix 001-NMS2 Slave Management Module for 3U Chassis

FiberMix 004-16NMS1 Master Management Agent Module for 10U Chassis

FiberMix 004-16NMS2 Slave Management Module for 10U Chassis

FiberMix 802-60 Module, 2 E1 channels optical multiplexer, SNMP-management

FiberMix 803-120 Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V, DC – 48V

FiberMix 805-120B Standalone, 4 E1 channels optical multiplexer, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V, DC –48V

FiberMix 804-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX

FiberMix 806-60B Module, 2 E1 channels optical multiplexer, SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX

FiberMix 803-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1310nmTX 1550nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-480B Standalone, 16 E1 channels optical multiplexer, SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 805-240B Standalone, 8 E1 channels optical multiplexer, remote SNMP-management SSF, Dual WL, 1550nmTX 1310nmRX, 19” 1U chassis, AC 115V or 230V/DC –48V

FiberMix 2304-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1310nmTX 1550nmRX, AC 115V or 230V, DC – 48V

FiberMix 2504-120 Standalone, 4 E1 channels optical multiplexer, 4 10/100 RJ45, remote SNMP-management, SSF, Dual WL, 1550nmTX 1310nmRX, AC 115V or 230V, DC –48V

FiberMix 2401-30, FiberMix 2601-30 Module - PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 1 E1 port and 1 Fast-Ethernet port

FiberMix 2401-60, FiberMix 2601-60 Module- PDH Fiber Optical Multiplexers - 1 single strand fiber optical port (Single mode 1310nm TX 1550nm RX and 1550nm TX 1310nm RX), 2 E1 ports and 1 Fast-Ethernet port

FiberMix 3100-155 SDH Multi-Service multiplexer

If you need further information, please fill out this form below

What kind of information would you like to receive from us?

Please fill out the contact information:
First name/Last name: *
Company: *
E-mail: *
Your phone (country/city code): *

* Indicated a required field

DYNAMIX^®