|
|
|
DYNAMIX UM SN/703
|
| G.SHDSL modem G.703 192kbps to 2.304Mbps N x 64kbps
(N=3 to 36) |
|
|
|
|
|
|
| • |
Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and greater interoperability |
| • |
Fast and cost-effective provisioning of traditional frame relay
(FR or T-HDLC) or TDM leased line services |
| • |
User existing copper loop infrastructures |
| • |
Can operate back to back connection |
| • |
Efficient single wire pair usage |
| • |
Up to 2.3Mbps symmetric service bit rate |
| • |
Auto rate installation maximizes data rate based on loop conditions |
| • |
Local management interface with LCD display |
| • |
Remote line loopback |
| • |
SHDSL Line performance monitoring |
| • |
Raw and per time interval statistics |
| • |
Bandwidth guarantee transmission equipment |
| • |
Remote management of modems for "point to point" connection |
| • |
Remote Upgrade Function |
 Back to Top
|
|
|
|
|
| Network Interface |
| | Line Rate: SHDSL per ITU G.991.2 |
| | Coding: Trellis coded pulse amplitude modulation |
| | Support: ANSI (Annex A) and ETSI
(Annex B) |
| | Payload rates: 192kbps to 2.304Mbps N x 64kbps
(N=3 to 36) |
| | Connection:
RJ-45 jack (2-wire) |
| G.703
Interface |
| RJ-45 for balanced 120Ω E1 cable |
| | BNC for unbalanced 75ΩE1 cable |
| Line Protection |
| Auto configuration wetting current |
| Loopback Tests |
| Local Loopback |
| Digital Loopback |
| Remote Loopback |
| Far-end Loobpack |
| Build-in 2047 bit tester |
| Framing |
| | G.703/G.704 |
| | CRC 4 enable/disable |
| | Unframed |
| | Framed |
| DSL Timing |
| | Network |
| | Internal |
| | DTE |
| Performance Monitoring |
| | ES, SES, UAS, Alarms, Errors for E1, SHDSL |
| Loopback Tests |
| | Local Loopback |
| | Digital Loopback |
| | Remote Loopback |
| | V.54 Loopback |
| | Build-in 211-1 bit tester |
| Management |
| | Configuration with keypad and LCD display |
| | Console port |
| | Support firmware upgradeable |
| Physical/Electrical |
| | Dimensions: 19.5 x 4.8 x 16.8 cmn |
| | Input: 90~240VAC with 50~60Hz |
| | Power
Consumption: 10W Max |
| | Operation: 0 to 50°C |
| | Humidity: Up to 95%
(non-condensing) |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
DYNAMIX UM SN/703 |
modem DYNAMIX UM SHDSL NTU with G.703 interface, 220Â |
| DYNAMIX UM SN/703 DC |
modem DYNAMIX UM SHDSL NTU with G.703 interface, 48Â |
|
|
Back to Top |
|
|
|
User's manual
