|
|
|
Dynamix DW 2626
|
| IP
PBX (2 PSTN, WAN, 4 x LAN, 6 FXS, SIP trunk) |
|
|
|
|
|
|
| • |
Plug and play PBX gateway for SOHO and small office
user |
| • |
Web Management interface and Multilingual supported |
| • |
2 PSTN lines, 6 Extensions and SIP trunk Calls
together |
| • |
Play built-in auto attendant greeting to incoming
call |
| • |
PSTN lines bypass to Phone extension automatically when
power or DW 2626 is failure |
| • |
System Configuration parameters backup and restore. |
 Back to Top
|
|
|
|
|
| Network Interface |
| | 1 WAN (10/100BaseT RJ-45) connect to Internet |
| | 4 LAN (10/100BaseT RJ-45) NAT, connect to local network devices |
| Telephony Interface |
| | 2 PSTN(RJ-11) for connecting to PSTN line from local Telco Company |
| | 6 FXS(RJ-11) as PABX Extension Line (connect to Legacy analog Phone
set) |
| Features |
| | SIP RFC 3261 Compliance |
| | Audio Codec: G.711, G.723.1 and G .729A |
| | In-band and out-band DTMF relay |
| | Support SIP Register and Calling ( One SIP Account only ) |
| | Support Backup SIP Proxy Server registration |
| | G.168 Echo Cancellation |
| | T.38 Fax Relay |
| | DTMF/FSK Caller ID Detection and Generation |
| | Intelligent Call Routing ( Not Support calls between PSTN and IP )
-Between extensions calls
-Between extension and IP calls
-Between extensions and PSTN calls |
| | Support Emergency Call through PSTN |
| | Provides Auto Attendant Service |
| | Support Direct Route to Operator |
| | Support Operator Hunting Based on Priority |
| | Support Operator Simultaneously Ringing |
| | Customizable Auto Attendant Greeting |
| | Two channels IVRs attendant greeting calls simultaneously |
| | Call Transfer |
| | Call Hold |
| | Call Forward (Restrict forward to both PSTN lines and IP calls ) |
| Management |
| | Web User Interface
(Multilingual) |
| | Telnet CLI |
| | Provides System Status |
| | System Configuration parameter Backup and Restore |
| | Reset to Default factory setting |
| | Firmware Upgrade |
| Environmental |
| | Dimension: 3.5 × 24.2 × 16 cm |
| | Weight: 0.935kg |
| | Operating Temp. & Humidity
Temp.: 0°C to 45°C ( 32°F to 113°F )
Humidity: 10% to 85% relative humidity, non-condensing |
| | Storage Temp. & Humidity
Temp.: 0°C to 55°C ( 32°F to 131°F )
Humidity: 10% to 95% relative humidity, non-condensing |
| | AC Power Adaptor
INPUT: AC100V to 240V, 50/60Hz
OUTPUT: DC 12V, 3.0A |
| | Regulatory: FCC (Part 15, Class B) &
CE. |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
Application #1
Dynamix DW 2626 is a plug and play PBX with 2-PSTN Line and 6 extensions which supports one SIP
account registration to ITSP Service provider ( SIP Server or Softswitch ). It is suitable for small
office PBX and be able to make VoIP call or local PSTN call. Built-in Routing Table
configuration, it route calls to PSTN Telco or IP call automatically.
Application #2
Dynamix DW 2626 is a plug and play PBX with 2-PSTN Line and 6 extensions even without connect to
IP network with ITSP Service provider. It is easy to make VoIP call once you connect WAN port
to IP network and register to an ITSP service provider. Or, connect to an remotely VoIP devices
for multi-office IP communication.
|
Back to Top
|
|
|
|
|
Dynamix DW 2626
|
IP PBX (2 PSTN, WAN, 4 x LAN, 6 FXS, SIP trunk) |
|
|
Back to Top |
|
|
Also see the products of this group:
|
|
|
|
