| Protocol |
| | SIP (Session Initiation Protocol) |
| Call Features |
| | Authentication |
| | Automated Attendant |
| | Call Transfer
(IP Phone, Dynamix DW FXS – 04)* |
| | Blind Transfer
(IP Phone, Dynamix DW FXS – 04)* |
| | Call Forward on Busy
(IP Phone, Dynamix DW FXS – 04)* |
| | Call Forward on No Answer
(IP Phone, Dynamix DW FXS – 04)* |
| | Call Forward Unconditional
(IP Phone, Dynamix DW FXS – 04)* |
| | Call Hold/Retrieval
(IP Phone, Dynamix DW FXS – 04)* |
| | Call Routing |
| | Call Waiting (IP
Phone, Dynamix DW FXS – 04)* |
| | Caller ID (IP
Phone, Dynamix DW FXS – 04)* |
| | Do Not Disturb
(IP Phone)* |
| | Flexible Extension Logic |
| | Music On Hold |
| | Music On Transfer |
| | Call Pickup |
| | Three-way Conference
(IP Phone)* |
| | Time and Date |
| | Trunking (Dynamix DW 4 FXO) |
| | VoIP Gateways
(Dynamix DW 4 FXO) |
| | Voice Mail to e-mail |
| | Voice Mail |
| | Call Detail Records |
| Technical Features |
| | Subscriber NAT traversal |
| | Phone set record Greeting |
| | Management: Web Browser Management |
| | HTTP upgrade firmware and ring back tone file |
| | Export/Import configuration |
| | Network
Interface: 1WAN 1LAN |
| | Support Voice
Codec: G.729, G.711µ, G.711A |
| | DTMF: In-band, RFC 2833, SIP-Info |
| | Network: Support Fixed
IP, DHCP mode and PPPoE Mode |
| | Build-in 1G storage
( Dynamix IP e PBX-100A) |
| Capacity |
| | 100 Register |
| | 13 concurrent calls |
| Codecs |
| | G.711 (A-Law &
M-Law) |
| | G.729 |
| LED |
| | Power: Light on when ePBX-100 is powered on |
| | Status: Light on when system is ready |
| | Alarm: LightFlash when system has problems |
| | SIP Trunk: Light on when ePBX-100 successfully registered to all of the enabled SIP Trunks;
Light flash when ePBX-100 failed to register to one of the enabled SIP Trunks;
Light off when there is‘ll; no SIP Trunk has enabled. |
| | CDR: ePBX-100 can outputCall Detail Records to external computer. User has to execute CDR program on computer,
when ePBX-100 is ready to connect with CDR server and output data, this indication will light
on. |
| | NET: Display Network status. If WAN port of ePBX-100 is under Fixed IP mode, LCD will light on.
If WAN portis under DHCP mode, and ePBX-100 succeeds
in getting IP, LED will be flashing. If WAN port is under DHCP mode, and ePBX-100 fails to get IP, LED will light
on. |
| | WAN
LINK/ACT: Light on when WAN port is connected to network. Flash when data is transmitting or receiving.
10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10
Mb/s. |
| | LAN
LINK/ACT: Light on when LAN port is connected to network. Flash when data is transmitting or receiving.
10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10 Mb/s. |
| Dimension |
| | 17.5 x 12.5 x 3.2 cm |
|
