DYNAMIX - is a leading supplier of broadband solutions: ADSL2+, SHDSL, HomePNA 3.0, VoIP, DSLAM, PowerLine. Modem, routers, multiplexer. Europe,Germany DYNAMIX - is a leading supplier of broadband solutions: ADSL2+, SHDSL, HomePNA 3.0, VoIP, DSLAM, PowerLine. Modem, routers, multiplexer. Europe,Germany DYNAMIX - is a leading supplier of broadband solutions: ADSL2+, SHDSL, HomePNA 3.0, VoIP, DSLAM, PowerLine. Modem, routers, multiplexer. Europe,Germany DYNAMIX - is a leading supplier of broadband solutions: ADSL2+, SHDSL, HomePNA 3.0, VoIP, DSLAM, PowerLine. Modem, routers, multiplexer. Europe,Germany
 

Home | Products | Support | Company News  |  Contact 

   Íà ðóññêîì ÿçûêå. DYNAMIX - îáîðóäîâàíèå øèðîêîïîëîñíîãî äîñòóïà: xDSL, ADSL, ADSL2+, SHDSL, HomePNA 3, VoIP, E1. Ìîäåìû, ìàðøðóòèçàòîðû, ìîñòû, êîíöåíòðàòîðû, øëþçû, ñòîéêè. Âåêòîð, Óêðàèíà, Ðîññèÿ  Óêðà¿íñüêîþ ìîâîþ. DYNAMIX - îáëàäíàííÿ øèðîêîïîëîñíîãî äîñòóïó: xDSL, ADSL, ADSL2+, SHDSL, HomePNA 3, VoIP, E1. Ìîäåìè, ìàðøðóòèçàòîðè, ìîñòè, êîíöåíòðàòîðè, øëþçè, ñò³éêè. Âåêòîð, Óêðà¿íà  
 
DYNAMIX UM-A (4 LAN)
Universal ADSL router (8 Mbps / 1 Mbps) with 4 Ethernet ports and Firewall support
Specification | Back panel | Ordering information

DYNAMIX UM-A (4 LAN) Universal ADSL router (8 Mbps / 1 Mbps) with 4 Ethernet ports and Firewall support
View Larger Picture

DYNAMIX UM-A (4LAN) - Full Rate ADSL Router provides the full rate maximum 8Mbps download speed with maximum 640Kbps uploads, as well as the lite 1.5Mbps splitter-less ADSL connection. DYNAMIX UM-A (4LAN) is a stand along equipment which can be simply configured through TFTP and configuration file. Easy configuration function guarantees the best performance on CO settings. No need user intervention. SNMP allows you to manage the network on remote side and TFTP enables further feature enhancement and reconfiguration. Included DHCP server assigns IP addresses to all workstations on your LAN. User's manual
       3 011 Kb
      
Quick start
       1 303 Kb
      
IEEE 802.3 and 802.3u over UTP (10/100Base-T) compliant for easy installation and configuration
Full rate operation with up to 8 Mbps downstream data rate and up to 640 Kbps upstream enables
High-speed access to ISP or corporate network 
Friendly GUI Configuration and Management software
Supports ADSL always-on 
Ongoing feature enhancements through TFTP download or upload of new firmware and configuration files 
Supports multiple PVC up to 8 PVCs for RFC 1483 and ATM Forum UNI 3.0, 3.1 and 4.0 signaling for SVC
Supports full VPI range (8 bits, 0-256) and VCI range (16 bits, 1-65535) over PVC.
VPI is limited to VPI 0 only over SVC. 
Support 4 Ports Ethernet Switch Interface (10/100Mbps) which compliant with IEEE 802.3x standards
Support Firewall specifications
Type - Standard USB Version 1.1 (option)
Enables end-to-end ATM support, which allows traffic management and QoS.
Built-in DHCP server automatically assigns IP addresses to all workstations on your LAN
All management and monitoring can be done through SNMP or Telnet session.
Back to Top  

Data Connection
 Downstream: Up to 8 Mbps 
 Upstream: Up to 640 Kbps
  Rate adaptive in 32 Kbps steps
  Connect distance: Up to 18,000 feet on 26 AWG wire 

Communication Standards Compliant  ADSL
  ANSI T1.413 issue 2
  ITU-T
  G.992.1 (G.dmt, full rate) Annex A 
 G.992.2 (G.lite) 
  G.994.1 (G.hs, Multimode) 

Encapsulation Protocols
 RFC 1483/2684 (Mutilple Protocol over ATM PVC, Bridged & Routed PDU for LLC/SNAP & VC Mux encapsulation)
  RFC 1577(Classic IP over ATM, MTU=1500)
  RFC 2364(PPP over ATM, LLC/ SNAP & VC Mux encapsulation)
  RFC 2516 (PPP over Ethernet) 

ATM
 ATM Forum UNI 3.0, 3.1 and 4.0 signaling 
  ATM Forum ILMI 4.0
  ATM Forum LANE 1.0 client, MTU=1516,over SVC only 
  ATM supports AAL5, AAL3/4, AAL2 and AAL0
  ATM Traffic shaping supports CBR and UBR, VBR-rt and VBT-nrt 
  OAM F4 and F5 segment end-to-end loopback (F4 on all VPIs, F5 on VPI 0 only 

Bridging
 Bridging features conformance to IEEE 802.1d and supports spanning tree algorithm and protocol

Routing
 RIP version 1(RFC 1058) and version 2(RFC 1723) 
  ARP (RFC 1293, supports only one single subnet)

FIREWALL
 Statefull Packet Inspection (SPI)
  DoS (Denial of Service) protection Service Filtering
  Access Policies based on on IP Address, Service Group, Time, Inbound Policy and Outbound Policy
  Hacker Log

Management and Monitoring
 DHCP (RFC 2131, RFC 2132) server, relay and client (DHCP server and client can?t be enabled simultaneously) 
  DNS Relay and client
  BOOTP (RFC 2131, RFC 2132)
  TFTP revision 2(RFC 1350)
  SNMP version 1(RFC 1155, RFC 1157, RFC 1213)
  TELNET server (RFC 854, 855, 857, 858)
  Command line configuration thru serial console port
  Password protection from access configuration manager
  Web-based Configuration

NAT
 NAT (NAPT, IP Masquerading) 

VPN
  PPTP VPN tunneling

PPP
 PAP (RFC 1334) and CHAP authentication protocol

Supported OS
 Windows 95, 98, ME, 2000, NT4.0, XP, Mac, UNIX & Linux

Certification
 FCC part 15 & 68, CE mark

Interface 
 LAN: 4 Ports Ethernet Switch Interface (10/100Mbps) through RJ-45 connector
 ADSL: ADSL line through RJ-11 connector
  Type - Standard USB Version 1.1, Connector - USB Type B (option)
  Console Port: DB9 RS-232 connector 

Power consumption
 6W max. through 9VDC
  1000mA power adaptor

Mechanical
 Size (app.): 199mm(width) x 125mm (depth) x 37mm (height)
  Net weight (app.): 400g

Environmental
 Operating temperature 0°C ~ 45°C ambient 
  Humidity 5 % ~ 95 % (non-condensing) 
  Storage temperature -20°C ~ 60°C 

Back to Top  

Back to Top
  
 DYNAMIX UM-A (4 LAN) Universal ADSL router (8 Mbps / 1 Mbps) with 4 Ethernet ports and Firewall support
Back to Top  

Also see the products of this group:

Tiger 2 Plus New! ADSL 2+ modem/router (24 Mbps / 1 Mbps) with Ethernet port and Firewall support
Tiger 2 Plus (4 LAN)  New!  ADSL2+ modem/router (24 Mbps / 1 Mbps) with 4 Ethernet ports and Firewall support
Tiger 2 Plus (1LAN, WiFi)  New!  ADSL2+ modem / router  (24 Mbps / 1 Mbps)  with Ethernet ports and  WiFI&Firewall support
 

If you need further information, please fill out this form below
What kind of information would you like to receive from us?
Please fill out the contact information:
First name/Last name: *
Company: *
E-mail: *
Your phone (country/city code): *
 
* Indicated a required field  

Home | Technologies | Products | Company News  |  Contact 

DYNAMIX®