Physical Interface |
| Ethernet port(RJ-45, 10/100
base-T)
1-WAN port, for connecting to router, ADSL modem(ATU-R), or switch hub
directly.
4-LAN port, for PC or other network devices connecting. |
| Telephony
port(RJ-11)
2-FXS ports, to connect with analog phone(POTS)
1-PSTN port, to connect with PSTN line for backup |
| Antenna RF connector |
| Power Jack: DC12V, 1.5A |
| Reset button(Factory
Default) |
| Status indicated LED |
| Indicates WAN,
LAN, FXS, PSTN, WLAN, and Power status |
IP Network connection |
| Broadband Router
(IP Gateway)
IPv4 (RFC 791)
MAC Address (IEEE 802.3)
TCP/UDP (RFC 793/768)
RTP/RTCP (RFC 1889/1890)
ICMP (RFC 792)
ARP (RFC 826)
Static IP (WAN)
DHCP Client (RFC 2131)
DHCP Server (RFC 2131)
PPPoE Client (RFC 2516)
DNS Client
DNS Relay
Dynamic DNS
NAT/NAPT (RFC 1631)
Vitual DMZ
Firewall:
IP Filtering
Port Filtering
MAC Filtering
URL Filtering
Port Forwarding
DoS: Denial of Service
|
| Bridge Mode
VPN Pass-Through: IPsec, PPTP, L2TP
NAT Traversal
UPnP IGD
STUN Client
SNTP Client (RFC 2030)
HTTP Server
Quality of Service
802.1Q VLAN Tag
DiffServ (RFC 2475) |
| Wireless LAN
Standard: IEEE 802.11 b/g compliant
Band: 2.4GHz (B) / 2.4GHz (G) / 2.4GHz (B+G)
Mode:
WiFi AP Mode,
WiFi Client Mode,
WDS Repeater Mode,
WiFi AP+WDS Repeater Mode
Universal Repeater Mode
SSID / Broadcast SSID
Channel: Ch 1 ~ 11, 13 for Europe (ETSI), 14 for Japan
Authentication Type: Open System / Shared Key
Data Rate: 1M, 2M, 5.5M, 11M, 6M, 9M, 12M, 18M, 24M, 36M, 48M, 54M
Wireless ISP: Bridged WAN and LAN together, WiFi Client connect to ISP's
AP.
802.1x Encryption and Authentication
Encryption: WEP (64/128bits), WPA/WPA1-TKIP/AES, Mixed WPA and WPA2
WPA Authentication: PSK:Pre-Shared Key (Personal) / Radius
(Enterprise)
Wireless Access Control by MAC address(Allow/Deny)
802.11f, IAPP (Inter Access Point Protocol)
Support Network Type: Infrastructure and Ad-Hoc mode
Support Site survey scan and Manual connect
Up-to 8 WDS AP List |
IP Telephony (VoIP) |
| SIPv2 (RFC 3261)
Outbound proxy setting for increasing performance, productivity, and security. |
| Voice Codecs
G.711 (a-Law/u-Law): 64 bits (PCM)
G.723.1: 6.3k/5.3k bits
G.726: G.726: 16/24/32/40K bits (ADPCM)
G.729A: 8k bits (CS-SCELP)
G.729B: adds VAD and CNG to G.729 |
| VAD – Voice Activity Detection with Silence Suppression |
| CNG – Comfortable Noise Generation |
| Voice Gain Adjustable |
| Automatic Gain Control |
| Line Echo Cancelation |
| Adaptive Jitter Buffer |
| Packet Loss compensation - increasing voice quality |
| DTMF: In-band, Out-of-band
(RFC 2833), and SIP Info |
| Caller ID:
Caller ID Generation DTMF, FSK (Bellcore, ETSI, BT, NTT)
Call Waiting Caller ID
Short Ring / Dual Tone before Caller ID |
| FAX transmission
Tone Detection
G.711 pass-through
T.38 Fax relay protocol |
| Modem transmission
Tone Detection
G.711 pass-through |
| Tone Generation (upto 13 countries localized tone seletable)
Ringing Tone
Ring Back Tone
Dial Tone
Programming Tone (customized Dial/Ring/Busy/Waiting tone)
Customized Ring Cadence |
| Call Features
Call Hold
Call Transfer (Blind)
Call Forward (Unconditional/No Answer/Busy)
Call Conference (3-ways)
DND (Do Not Disturb) |
| Dial Plan
Proxy routing call
Direct IP call
PSTN call
Speed Dial
HotLine
Prefix Insert/Drop |
Security |
| 802.1x Wireless Encryption and Authentication |
| Build-in Firewall |
| Denial of Service |
| MD5 for SIP authentication
(RFC 2069 / 2617) |
| Password protected Admin access authority |
Setting and maintenance |
| Configure & Update method: Web Browser
(HTTP) |
| Acess password setting and change |
| IVR Annoucement of IP address |
| System Status indication |
| System Statistic |
| Save / Reload Setting parameter |
| System Log Saving locally and remotely |
| Date & Time setting |
Environmental |
| Dimension: 175*32*126
mm |
| Weight: 250g (Unit) |
| Operating Temp. & Humidity
Temp.: 0°C - 45°C
Humidity: 10% - 85% relative humidity, non-condensing |
| Storage Temp. & Humidity
Temp.: 0°C- 55°C
Humidity: 10% - 95% relative humidity, non-condensing |
Regulatory
Compliance |
| FCC (Part 15, Class B) & CE |
AC Power
Adaptor |
| INPUT: AC100V-240V, 50-60Hz
OUTPUT: DC 12V, 1.5A |
| |
|