|
Dynamix eIP PBX-100
|
VoIP
PBX |
|
|
|
• |
Support SIP protocol |
• |
With Dynamix DW 2 FXO or Dynamix DW 4 FXO can provide PSTN access
function |
• |
Dynamix DW IP Phone or Dynamix DW Phone LP can provide extensions |
• |
Network: Support Fixed
IP, DHCP mode and PPPoE Mode |
• |
Management: Web Browser Management |
• |
HTTP upgrade firmware and ring back tone file |
• |
Network
Interface: 1WAN 1LAN |
• |
DTMF: In-band, RFC 2833, SIP-Info |
• |
Codecs: G.711 (A-Law & M-Law), G.729 |
• |
Build-in 1G storage (Dynamix IP
e PBX-100A) |
• |
100 Register and 13 concurrent calls |
Back to Top
|
|
|
|
Protocol |
| SIP (Session Initiation Protocol) |
Call Features |
| Authentication |
| Automated Attendant |
| Call Transfer
(IP Phone, Dynamix DW FXS – 04)* |
| Blind Transfer
(IP Phone, Dynamix DW FXS – 04)* |
| Call Forward on Busy
(IP Phone, Dynamix DW FXS – 04)* |
| Call Forward on No Answer
(IP Phone, Dynamix DW FXS – 04)* |
| Call Forward Unconditional
(IP Phone, Dynamix DW FXS – 04)* |
| Call Hold/Retrieval
(IP Phone, Dynamix DW FXS – 04)* |
| Call Routing |
| Call Waiting (IP
Phone, Dynamix DW FXS – 04)* |
| Caller ID (IP
Phone, Dynamix DW FXS – 04)* |
| Do Not Disturb
(IP Phone)* |
| Flexible Extension Logic |
| Music On Hold |
| Music On Transfer |
| Call Pickup |
| Three-way Conference
(IP Phone)* |
| Time and Date |
| Trunking (Dynamix DW 4 FXO) |
| VoIP Gateways
(Dynamix DW 4 FXO) |
| Voice Mail to e-mail |
| Voice Mail |
| Call Detail Records |
Technical Features |
| Subscriber NAT traversal |
| Phone set record Greeting |
| Management: Web Browser Management |
| HTTP upgrade firmware and ring back tone file |
| Export/Import configuration |
| Network
Interface: 1WAN 1LAN |
| Support Voice
Codec: G.729, G.711µ, G.711A |
| DTMF: In-band, RFC 2833, SIP-Info |
| Network: Support Fixed
IP, DHCP mode and PPPoE Mode |
| Build-in 1G storage
( Dynamix IP e PBX-100A) |
Capacity |
| 100 Register |
| 13 concurrent calls |
Codecs |
| G.711 (A-Law &
M-Law) |
| G.729 |
LED |
| Power: Light on when ePBX-100 is powered on |
| Status: Light on when system is ready |
| Alarm: LightFlash when system has problems |
| SIP Trunk: Light on when ePBX-100 successfully registered to all of the enabled SIP Trunks;
Light flash when ePBX-100 failed to register to one of the enabled SIP Trunks;
Light off when there is‘ll; no SIP Trunk has enabled. |
| CDR: ePBX-100 can outputCall Detail Records to external computer. User has to execute CDR program on computer,
when ePBX-100 is ready to connect with CDR server and output data, this indication will light
on. |
| NET: Display Network status. If WAN port of ePBX-100 is under Fixed IP mode, LCD will light on.
If WAN portis under DHCP mode, and ePBX-100 succeeds
in getting IP, LED will be flashing. If WAN port is under DHCP mode, and ePBX-100 fails to get IP, LED will light
on. |
| WAN
LINK/ACT: Light on when WAN port is connected to network. Flash when data is transmitting or receiving.
10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10
Mb/s. |
| LAN
LINK/ACT: Light on when LAN port is connected to network. Flash when data is transmitting or receiving.
10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10 Mb/s. |
Dimension |
| 17.5 x 12.5 x 3.2 cm |
|
Back to Top
|
|
|
|
|
|
Dynamix IP ePBX-100 |
VoIP PBX |
Dynamix IP ePBX-100A |
VoIP PBX (Build-in 1G storage) |
|
Back to Top |
|
Also see the products of this group:
|
|
|