|
|
|
DYNAMIX
UM-S4B/4W
|
| G.SHDSL.bis Router (4-wire) |
|
|
|
|
|
The SHDSL.bis router allows customers to leverage the latest broadband technologies to meet their growing data communication needs. Through the power of SHDSL.bis ATM Router, you can access superior manageability and reliability.
Complying with TCPAM32,
DYNAMIX
UM-S4B/4W G.SHDSL.bis Router is able to extend the longer distance at same data rate or higher date rate at same distance contrast to conventional G.SHDSL device (TCPAM16).
With bandwidth of up to 11.392Mbps, the
DYNAMIX UM-S4B/4W
are able to double the bandwidth by using two pairs of standard phone wire as a connection medium contrast to a 2-wire one pair.
|
User's manual
Quick start
|
By embedded bridging and routing function, two
DYNAMIX
UM-S4B/4W s routers work as gateways from remote office to headquarter without expensive CSU/DSU peripherals and V.35 Cisco routers. Inter-LAN communication between separated two offices just need one telephone pair and two
DYNAMIX
UM-S4B/4W routers.
Using existing telephone lines, the
DYNAMIX
UM-S4B/4W consolidate all traffic onto a single high-speed trunk for Internet activities or sharing a corporate intranet, which is designed not only to optimize the service bit rate from central office to customer premises but also integrates high-end Bridging/ Routing capabilities with advanced functions such as Multi-DMZ, Stateful Packet Inspection(SPI) and VPN pass-through. Through the simple-yet-powerful management user interface of the
DYNAMIX
UM-S4B/4W, networks administrators can complete a managed network deployment simply in seconds.
DYNAMIX
UM-S4B/4W supports four ports 10Base-T /100Base-T auto-negotiation and auto-MDIX switching ports to meet the enterprise need.
Advanced stateful packet inspection (SPI) firewall - supports only DYNAMIX UM-S4FB/4w.
|
|
|
|
| • |
Friendly user interface for various application environments |
| • |
Support connection to broadband Internet services with high productivity of IP routing and transparent learning
bridge. |
| • |
Complete ATM protocol stack implementation over SHDSL |
| • |
Support PAP/CHAP/MS-CHAP user authentication on
PPPoE/PPPoA |
| • |
Support SNMPv1/SNMPv2 agent and MIB II of SNMP management |
| • |
Support craft Console (RS-232) and remote management
(Telnet or HTTP) via TCP/IP network and allow local or remote problems shooting in detail |
| • |
NAT/PAT feature lets user both conserve valuable IP address space and reduce IP address
management, meanwhile, also protects certain attack from outer network or internal
workstations. SNMP management with SNMPv1/v2 agent and MIB II |
| • |
Getting enhancements and new features via Internet software upgrade |
| • |
Advanced stateful packet inspection
(SPI) firewall - (only DYNAMIX UM-S4FB/4w) |
 Back to Top
|
|
|
|
|
| LAN Interface |
| | 4-port switching hub |
| | 10Base-T /100 Base-TX auto-negotiation |
| | Auto-MDIX |
| Hardware Interface |
| | WAN: RJ-45 |
| | LAN: RJ-45 x 4 |
| | Console port: RS232 |
| | RST: Reset button for factory default |
| WAN Interface |
| | SHDSL: ITU-T G.991.2
2004(Annex A/B/F/G) |
| | Encoding
scheme: TC-PAM16, TC-PAM32 |
| | Data Rate:
N x 64Kbps (N=3~89) in 2-wire mode
N x 128Kbps (N=3~89) in 4-wire mode |
| | Impedance: 135 ohms |
| Indicators |
| | General: PWR |
| | WAN: LNK, ACT |
| | LAN: 1, 2, 3, 4 |
| | SHDSL: ALM |
| ATM |
| | Up to 8 PVCs |
| | OAM F4/F5 loopback test |
| | AAL5 |
| ATM QoS |
| | UBR (Unspecified Bit
Rate) |
| | CBR (Constant
Bit Rate) |
| | VBR-rt (Variable Bit Rate Real
Time) |
| | VBR-nrt (Variable Bit Rate Non-real
Time) |
| AAL5 Encapsulation |
| | VC multiplexing and
SNAP/LLC |
| | Ethernet over ATM
(RFC 2684/1483) |
| | PPP over ATM (RFC 2364) |
| | Classical IP over ATM
(RFC 1577) |
| PPP |
| | PPP over Ethernet for fixed and dynamic IP (RFC 2516) |
| | PPP over ATM for fixed and dynamic IP
(RFC 2364) |
| | User authentication with
PAP/CHAP/MS-CHAP |
| Routing |
| | Support IP/TCP/UDP/ARP/ICMP/IGMP protocols |
| | IP routing with static routing and RIPv1/RIPv2 (RFC1058/2453) |
| | IP multicast and IGMP proxy (RFC1112/2236) |
| | Network address translation
(NAT/PAT) (RFC1631) |
| | NAT ALGs for
ICQ/Net-meeting/MSN/Yahoo Messenger |
| | DNS relay and caching (RFC1034/1035) |
| | DHCP server, client and relay (RFC2131/2132) |
| Bridging |
| | IEEE 802.1D Transparent Bridging |
| | IEEE 802.1q VLAN |
| | Port-based VLAN |
| Security |
| | DMZ host/Multi-DMZ/Multi-NAT function |
| | Virtual server mapping (RFC1631) |
| | VPN
pass-through for PPTP/L2TP/IPSec tunneling |
| | Natural NAT firewall |
| | Advanced stateful packet inspection
(SPI) firewall - (only DYNAMIX UM-S4FB/4w) |
| | Denial of service protection |
| | User access
control; deny certain PCs access to internet services |
| Management |
| | Easy-to-use web-based GUI for quick setup, configuration and management |
| | Menu-driven
interface/Command-line interface (CLI) for local console and Telnet access |
| | Password protected management and access control list for administration |
| | SNMP management with SNMPv1/SNMPv2c (RFC1157/1901/1905) agent and MIB II (RFC1213/1493) |
| | Software upgrade via
web-browser/TFTP server |
| Physical/Electrical |
| | Dimensions: 18.7 x 3.3 x 14.5 cm
(WxHxD) |
| | Power: 100~240VAC |
| | Power
consumption: 9 watts |
| | Temperature: 0~45°C |
| | Humidity: 0%~95% RH
(non-condensing) |
| Memory |
| | 2MB Flash Memory, 4MB SDRAM |
|
|
Back to Top
|
|
|
|
|
|
|
|
| DYNAMIX UM-S4B/4w |
SHDSL.Bis modem/ router 4 LAN-ports
(4-wire) |
| DYNAMIX UM-S4FB/4w |
SHDSL.Bis modem/ router 4 LAN-ports and firewall
(4-wire) |
|
|
Back to Top |
|
|
|
