|
|
| DYNAMIX UM-SNB |
| G.SHDSL.bis NTU |
|
|
View Larger
Picture
|
Dynamix UM-SNB - SHDSL.bis NTU is a telecommunication product for carriers or SME users. Supporting four
or three DTE interfaces (E1/T1, V.35 & Ethernet) in one device.
Dynamix UM/SNB are designed to provide a flexible and efficient solution to handle various connections
Dynamix UM-SNB as E1interface application offers two different ways to connect customers a high-speed TDM services with two G.703 E1 interfaces
(Balanced 120Ω RJ45 jack and Unbalanced 75Ω dual BNCs). The G.703 interface will carry from
64 kbps to 2.048 Mbps.
Dynamix UM-SNB as Serial interface application offers the customers premise a high-speed TDM service with a DB25 interface. The industry standard DB25 interface can be configured as a V.35/RS530 or V.36/X.21 connection. The DB25 interface can transfers data up to
5.696 Mbps (for 2-wire model) or up to 11.392 Mbps (for 4-wire model).
|
User's manual
5.8
Mb
Quick start
|
Dynamix UM-SNB as
Ethernet interface application offers the customers premise a high-speed TDM services with a LAN interface. The industry standard LAN interface can detect a 10M or 100M connection automatically.
Dynamix UM-SNB (3 in 1) - Multi-interface model (E1+Serial+Ethernet)
- It offers three types of interface: E1 interface (balanced 120Ω RJ45 jack and unbalanced 75Ω dual BNCs), Serial interface (DB25 female connector) and Ethernet interface (RJ-45 connector).
You can select one of the following:
- E1 interface only
- Serial interface only
- Ethernet interface only
- E1 and Serial interface
- E1 and Ethernet interface.
Dynamix UM-SNB (4 in 1) - Multi-interface model (E1/T1+Serial+Ethernet)
- It offers four types of interface: E1 interface (balanced 120Ω RJ45 jack and unbalanced 75Ω dual BNCs), T1 interface (balanced 120Ω RJ45
jack), Serial interface (DB25 female connector) and Ethernet interface (RJ-45 connector).
You can select one of the following:
- E1 interface only
- T1 interface only
- Serial interface only
- Ethernet interface only
- E1 and Serial interface
- E1 and Ethernet interface
- T1 and Serial interface
- T1 and Ethernet interface.
Dynamix UM-SNB SHDSL.bis NTU can be configured and managed via EOC, or menu-driven VT100 compatible Asynchronous Terminal Interface, either locally or
remotely.
Dynamix UM-SNB is equipped with an auto rate capability that identifies the maximum line rate supported by the copper loop. This powerful automatic configuration capability makes installation and service provisioning simple and painless. Further flexibility is provided as the ability to manually set the maximum NTU speed at different levels for different customer-tailored service
offerings.
|
Interface
|
2/4
wire
|
AC
|
DC
|
AC
or DC
2 power supply
|
| E1
+ Serial + Ethernet |
2 |
UM-SNB/3in1/A |
UM-SNB/3in1/D |
UM-SNB/3in1/AD |
| 4 |
UM-SNB/3in1/4w/A |
UM-SNB/3in1/4w/D |
UM-SNB/3in1/4w/AD |
| E1/T1
+ Serial + Ethernet |
2 |
|
|
|
| 4 |
UM-SNB/4in1/4w/A |
UM-SNB/4in1/4w/D |
UM-SNB/4in1/4w/AD |
|
|
|
|
|
| • |
Standard G.shdsl (ITU G.991.2) supports for improved reach/speed and greater interoperability |
| • |
Fast and cost-effective provisioning of traditional frame relay
(FR or T-HDLC) or TDM leased line services |
| • |
User existing copper loop infrastructures |
| • |
Can operate back to back connection |
| • |
Efficient single wire pair usage |
| • |
Up to 11.392 Mbps symmetric service bit rate (for 4-wire
model) |
| • |
Auto rate installation maximizes data rate based on loop conditions |
| • |
Local management interface with LCD display |
| • |
Remote line loopback |
| • |
SHDSL Line performance monitoring |
| • |
Raw and per time interval statistics |
 Back to Top
|
|
|
|
|
| WAN Interface |
| | Line Rate: SHDSL per ITU G.991.2 (2004) |
| | Coding: Trellis coded pulse amplitude modulation
(TC-PAM16 and TC-PAM32) |
| | Support: Annex A ,B , F and G |
| | Payload
rates: to 5.696 Mbps (N x 64kbps, N=3 до 89) for 2-wire
to 11.392 Mbps (N x 64kbps, N=6 до 178) for 4-wire |
| | Connection: RJ-45 jack (2-wire or 4-wire) |
| | Impedance: 135 ohms |
| G.703 Interface (as E1) |
| | Connection:
RJ-48C for balanced 120Ω E1 cable
BNC for unbalanced 75Ω E1 cable |
| | Line Rate :
2048 KHz +/- 50ppm |
| | Line code: HDB3/AMI |
| | Framing : PCM30/PCM30C/PCM31/PCM31C and Unframed |
| | Data Rate : 64
Kbps to 2.048 Mbps ( Nx64Kbps, N=1 to 32) |
| | Operation : Full E1 and Fractional E1 |
| G.703 Interface (as T1) |
| | Connection: RJ-48C for balanced 100Ω T1 cable |
| | Line Rate :
1544 KHz +/- 50ppm |
| | Line code: B8ZS |
| | Framing: SF/ESF/Unframed |
| | Data Rate : 64
kbps to 1.536 Mbps (
N=1 to 24) |
| | Operation : Clear Channel and
Fractional |
| Serial Interface (as RS-530/V.35/X.21) |
| | Payload rates:
Up to 5.696 Mbps (for 2-wire model)
Up to 8.192 Mbps (for 4-wire model) |
| | Support V.35/RS-530 or V.36/X.21 |
| LAN Interface (as Ethernet) |
| | Single Ethernet Interface |
| | 10/100 Mpbs Half/Full Duplex, Auto-sensing, Auto-Crossover |
| | Up to 1024 MAC address learning, filtering bridge |
| DSL Timing |
| | Internal |
| | From E1/T1 Recovery
(as E1/T1) |
| | From DTE ( as V.35 and Ethernet) |
| Performance Monitoring |
| | ES, SES, UAS, LOWS for SHDSL |
| | ES, SES, UAS for E1 |
| | Alarms and Errors for SHDSL or interface |
| Loopback Tests
(for E1, T1 and V.35 interface only) |
| | Local Digital Loopback |
| | Local Loopback |
| | Remote Line Loopback |
| | Remote Payload Loopback |
| | Far-end Line Loopback |
| | Far-end Payload Loopback |
| | V.54 Loopback (for V.35
interface) |
| | Build-in 211-1 bit BER
tester |
| Management |
| | Configuration with keypad and LCD display |
| | Console port (RJ45 , RS232C) |
| | Support firmware upgradeable |
| Physical/Electrical |
| | Dimensions: 19.8 x 4.6 x 16.8 cm |
| | AC Input: 90~240V with 50~60Hz |
| | DC Input: -48V |
| | Power
Consumption: 10W Max |
| | Operation: 0 to 50°C |
| | Humidity: Up to 95%
(non-condensing) |
|
|
Back to Top
|
|
|
|
|
|
|
|
|
|
|
Interface
|
2/4
wire
|
AC
|
DC
|
AC
or DC
2 power supply
|
| E1
+ Serial + Ethernet |
2 |
UM-SNB/3in1/A |
UM-SNB/3in1/D |
UM-SNB/3in1/AD |
| 4 |
UM-SNB/3in1/4w/A |
UM-SNB/3in1/4w/D |
UM-SNB/3in1/4w/AD |
| E1/T1
+ Serial + Ethernet |
2 |
|
|
|
| 4 |
UM-SNB/4in1/4w/A |
UM-SNB/4in1/4w/D |
UM-SNB/4in1/4w/AD |
|
|
Back to Top |
|
|
|
