Dynamix IP ePBX-100A-128 Embedded Asterisk IP-PBX

Dynamix IP ePBX-100A-128

Embedded Asterisk IP-PBX

Specification | Front panel | Back panel | Ordering information

Dynamix IP ePBX-100A-128 is the new generation IP PBX system for small enterprise. It is also designed to operate on a variety of VoIP applications, such as auto-attendant, voice conference, call transfer, call pick up and IP-based communications. Beside voice switch over IP, it also supports Video switch over IP-PBX. It integrates Video phone WVP-800, SIP based IP Camera for Security and Surveillance purpose. SIP IP based Door Phone with Video are also integrated to establish an voice, Video, Security and office monitoring application. It is suitable for small Enterprise/Office or homes application.

Customers can select different suite and optional products to meet their request. To Integrate with FXO gateway ( i.e. Dynamix DW 2 FXO and Dynamix DW 4 FXO ) to provide PSTN lines access. Install IP Phone Dynamix DW IP Phone and Dynamix DW Phone LP – 201 to provide IP phone or attendant console. To install FXS gateway to connect analog phone sets such as FXS-08 and 3504A , 3502A.

To install Video Phone, SIP IP Camera to provide front desk Lobby monitoring and Security / IP Surveillance purpose. To Install SIP Door Phone to welcome visitor from any extension of ePBX-100A-128 without allocating one staff at front desk.

With flexible and full functionality, Dynamix IP ePBX-100A-128 give a complete transition from traditional digital PABX to the new generation IP-PBX.

User's manual

Quick start

•

Support SIP protocol

•

With Dynamix DW 2 FXO or Dynamix DW 4 FXO can provide PSTN access function

•

Dynamix DW IP Phone or Dynamix DW Phone LP can provide extensions

•

Network: Support Fixed IP, DHCP mode and PPPoE Mode

•

Management: Web Browser Management

•

HTTP upgrade firmware and ring back tone file

•

Network Interface: 1WAN 1LAN

•

DTMF: In-band, RFC 2833, SIP-Info

•

Codecs: G.711 (A-Law & M-Law), G.729

•

Build-in 1G storage (Dynamix IP e PBX-100A)

•

100 Register and 13 concurrent calls

Protocol
	SIP (Session Initiation Protocol)

Call Features
	Automated Attendant
	Branch Office
	Call Routing
	Speed Dial
	Call Transfer
	Call Forward
	CLIR
	Do Not Disturb
	Call Pickup (Global and Group)
	Specified Call Pickup
	Call Park
	Camp-On (Call Back on Busy)
	SIP Trunk
	Call Monitor
	CDR - Call Detail Record for Billing Purpose
	Busy Lamp Filed
	Music On Hold
	Music Ring Back Tone
	Voice Mail to E-mail
	Access Voice Mail by phone set

Technical Features
	NAT Traversal
	Export and Import Configuration
	Built-in 1 GB voice mail storage

Capacity
	15 concurrent calls

Codecs
	Voice Codec : G.711, G .729A, GSM and G.723 Pass-through
	H.263 Video Codec pass-through

LED
	Power: Light on when ePBX-100 is powered on
	Status: Light on when system is ready
	Alarm: LightFlash when system has problems
	SIP Trunk: Light on when ePBX-100 successfully registered to all of the enabled SIP Trunks; Light flash when ePBX-100 failed to register to one of the enabled SIP Trunks; Light off when there is‘ll; no SIP Trunk has enabled.
	CDR: ePBX-100 can outputCall Detail Records to external computer. User has to execute CDR program on computer, when ePBX-100 is ready to connect with CDR server and output data, this indication will light on.
	NET: Display Network status. If WAN port of ePBX-100 is under Fixed IP mode, LCD will light on. If WAN portis under DHCP mode, and ePBX-100 succeeds in getting IP, LED will be flashing. If WAN port is under DHCP mode, and ePBX-100 fails to get IP, LED will light on.
	WAN LINK/ACT: Light on when WAN port is connected to network. Flash when data is transmitting or receiving. 10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10 Mb/s.
	LAN LINK/ACT: Light on when LAN port is connected to network. Flash when data is transmitting or receiving. 10/100: Light on when network rate is 100 Mb/s, and light off when network rate is 10 Mb/s.